How to use the Line Launcher.

Do not operate the Line Launcher until you have read the instruction manual completely.

Remove the Cartridge Cap and check the CO2 canister is empty.
Tie one end of the line to the base of the float Pod. Load the Pod into the metal Pod Tube, base first, ensuring the line is sitting in the groove on the side of the Pod. Use the Push Rod to position the Pod at the bottom of the barrel.
Tie the other end of the line to a secure surface eg boat rail, fence, and clip the pre-loaded Line Canister in place. Ensure the line is not tangled or wrapped around any objects.
Load the CO2 cartridge and secure the Cartridge Cap.
Point the Line Launcher away from you, aim slightly upwind or up current of your target. Nose up 22 degrees. Don't rest the line launcher on any part of your body.
To fire: Push the safety catch forward & pull the trigger.

ABORTING A LAUNCH

Press and hold the Pressure Release Button (near the Cartridge Cap) until the gas has emptied.

IMPORTANT

Never look down the Pod Tube, or insert anything into the Line Launcher when it is charged.
Never point the Line Launcher directly at any person, animal or equipment.
Do not let untrained, or young people operate the Line Launcher.
Never leave the Line Launcher unattended when charged.